Pump station tanker and wet-well emptying
When the chamber is too full to work in safely, a tanker draws the level down first. The same attendance can include high-pressure jetting to clear fats, rags and sediment that caused the failure.
Emergency repair
Engineers and tankers available every day of the year when a pump station alarm is going off, a pump has tripped, or sewage or surface water is backing up.

Treat a high-level alarm as urgent. It means the pumps have not kept up, or have not been told to start. Reduce water use where you can — avoid baths, showers, the washing machine and unnecessary flushes — so the chamber has a chance of not overflowing before an engineer arrives.
Do not open or enter the chamber, and do not try to run the pumps manually or change control-panel settings unless you have been shown how to do so safely. If it is safe, note whether any pump-running lights are on, whether a breaker has tripped, and whether the alarm has a mute, so you can tell the engineer what you have seen.
Then telephone 01483 XXX XXX — the same number is in the header and on the contact page. Do not wait to see if the level drops on its own, particularly on a basement, a car park or a housing development.
A typical emergency visit starts with making the site safe, pumping out the chamber if needed, clearing rag, fats and sediment, and getting at least one pump running. If a pump, float or panel has failed, we can often repair or replace it on the same attendance; if not, we will tell you clearly what has to happen next.
When the chamber is too full to work in safely, a tanker draws the level down first. The same attendance can include high-pressure jetting to clear fats, rags and sediment that caused the failure.
Common causes are a rag-bound impeller, a stuck or fouled float, a failed non-return valve, a tripped breaker or a worn pump. We diagnose the cause rather than only silencing the alarm.
Once the station is stable, we will say whether a one-off repair is enough or whether planned pump station servicing — and a proper desilt — would reduce the chance of a repeat call-out.
Call-outs are taken for domestic and commercial sites throughout Surrey, including Guildford, Woking, Epsom, Reigate and Redhill, Leatherhead and Dorking and Farnham and Camberley. We prioritise overflowing stations, basement pump rooms and properties at immediate risk of flooding.
We attend stations of any make, age or design. Telephone support is available throughout the year, with a 24-hour engineer response. If you already have a maintenance contract, have the contract number to hand if you can; it is not required for us to attend.